Wall Mounting Instructions for the BPM-100
Blood Pressure Monitor:
1. Locate hardware required for mounting:
- 4 x ¼ " metal bushings
- 4 screws (use #2 Philips screwdriver)
- 4 drywall anchors
2. To find a suitable location:
- Ensure that the provided power supply cord can reach a AC mains
wall socket (less than 2m).
-
Ensure that the blood pressure cuff and coiled tubing can reach
the patient (less than 2m).
-
Ensure that the BpTRU is at a suitable height to be read by most
operators.
Ensure that no wall studs will interfere with the drywall
anchors.
3. Use the bracket as a template to mark the screw
locations.
4. Using a 1/8" bit, drill holes through the drywall
in the locations marked
5. Tap drywall anchors into the holes with a
hammer
6. Place metal bushings on screws.
7. Hold bracket against the wall, ensuring that the
wall anchors are visible through the screw holes.
8. Screw through bracket holes into wall anchors
directly. Ensure the screws are hand tight.
9. Insert reference card into the slot on the
mounting bracket.
Note: Drywall mounting screws are provided with the BpTRU . For
any other wall type, please contact your distributor for information on
proper fasteners.
