Wolf X-Ray Illuminator Recessing Kit allows most Wolf Illuminators to be beautifully recessed flush in the wall by the simple attachment of a recessing frame. As shown in the drawing at left, the frame consists of four sections (2 horizontal, 2 vertical) that screw onto the body of your illuminator to recess your illuminator. Stock numbers for the frames are shown below. (A single illuminator gets a single frame, a 2 over 2 illuminator gets a 2 over 2 frame, etc.)
Using the screws and holes provided, screw in the 2 vertical frame sections first. Then, using the screws and holes provided, screw in the 2 horizontal frame sections (the flange on the vertical sections will overlap behind the horizontal sections).
The illustration shows a trimline 3 bank unit with the plexiglass viewing panel and the left and right hand reflectors removed.
Loading warranty and return information for Recessing Kits for Wolf X-Ray Illuminators...





