The Wolf Trimline Plus Hi-Lo X-Ray Illuminator is housed in a 3 1/4 inch deep cabinet with a baked on white finish. The Wolf Hi-Lo X-Ray Illuminator features two variable light intensites (six bulbs dim to four bulbs), a roller grip film retainer, film activated auto switches, and cluster switches, on 2 over 2 units and up. The Wolf Trimline Plus Hi-Lo X-Ray Illuminator comes with the E-Z bar for easy wall mounting of the unit.
You can go from 6,350 to 9,000 Candela per square meter at the push of a button. Illumination is from six lamps in high intensity, four lamps in low intensity. The Trimline Plus Hi Lo X-Ray Illuminator is available in 12 sizes. The standard Line Cord is 8 foot long, three wire, grounded, hospital grade plug for wall-mounted units. In the standard configuration, line cords are located on the lower right side of the illuminator. All electrical components are UL listed. Also available in 220 VAC.
Due to increased amperage necessary to operate 4 and 6 bulb illuminators, the Trimline Plus Hi-Lo and Trimline Plus series should have dedicated electric power lines
Loading specs for Wolf Trimline Plus Hi-Lo Series X-Ray Illuminators...
Dimensions for each model are shown below
Loading warranty and return information for Wolf Trimline Plus Hi-Lo Series X-Ray Illuminators...
Loading accessories for Wolf Trimline Plus Hi-Lo Series X-Ray Illuminators...
Wolf Trimline Series X-Ray Illuminators
|
Wolf Trimline Plus X-Ray Illuminator Series
|
Wolf Econoline X-Ray Illuminator
|
Wolf Trimline Basic X-Ray Illuminator
|
Wolf Trimline III X-Ray Illuminator
|
Wolf MG 7 X-Ray Illuminator
|
Wolf X-Ray Liberator Plus Illuminator Series
|





