Toll Free: 1.888.345.4858 | Fax: 425.222.6030
The ability to place orders on the site has been temporarily disabled - to read more on that, click here

Amico Apollo MS Hospital Bed

Apollo Medical Bed
Apollo Medical Bed
Amico B-E-AM1-4000-120 Apollo Medical Bed
  • Share
Model: B-E-AM1-4000-120
Panel Color:
CHAT FOR QUOTE
By: Amico

  • Made In Canada
  • Weight Capacity: 550 lbs (250 kg)
  • Overall Dimensions: 92 x 42 in LxW
  • Patient Surface Area: 84 x 35 in LxW
  • Height Range: 16 - 28 in (40 - 71 cm)
  • Five adjustable positions
  • Weight capacity of 550 lbs
  • Adjustable knee and head sections
  • Low minimum height for safer transfers and reduced fall impact
  • Adjustable height
  • Trendelenburg and Reverse-Trendelenburg positions
  • Linak™ DC Actuators for quiet adjustments
  • Linak™ DC Actuators offer high reliability and protect against fluid damage
  • Auto-contour function creates natural seated position
  • Auto-contour function also helps prevent mattress movement
  • Flat button brings bed back to a flat position
  • CPR release lowers head section in case of emergencies
  • Battery backup allows for adjustments during transfer or power outage
  • Unique side rail design helps prevent against entrapment
  • Side rails meet HBSW and IEC entrapment regulations
  • Patient controls located on the inside of side rails
  • Patient controls include adjustments, night light, and nurse call button
  • LED light allows patients to operate controls in the dark
  • Staff controls located on the outside of both side rails and the footboard
  • Lock-out controls for staff prevent unwanted adjustments
  • Lock-out controls located on footboard and outer side rails
  • Includes folding IV pole
  • Four IV pole sockets, one at each corner
  • Integrated pump holder located at the footboard
  • Custom 6 inch Tente® swivel caster wheels for easy maneuvering
  • Easy access brakes located at the center of both sides
  • Roller bumpers at each corner protect walls and bed during transport
  • Foot section extends up to 4 inches for taller patients
  • Mattress retainer prevents sliding
  • Flat powder coated metal litter deck for easy cleaning
  • Flat deck allows for use with standard mattresses
  • Choice of blue or maple side rail colors
  • Headboard stays low for easy staff access
  • Head and foot boards remove easily
  • Hospital grade plug
  • For mattresses - See related products above
  • Choice of blue or maple side rail accent colors
Included with Hopsital Bed
  • Bed
  • Battery backup
  • Head and foot boards
  • IV Pole
  • Hospital grade plug
More Details

Additional Components

Foam Mattress

Ultra Mattress More Info
500 lb Capacity
Model: M-THEA-BZ77-80366

XL Foam Mattress

Ultra XL Mattress More Info
500 lb Capacity
Model: M-THEA-BZ77-84366

Pressure Mattress

Economy Pressure Relief Mattress More Info
450 lb Capacity
Model: M-AURA-APSE-80368

XL Pressure Mattress

Economy Pressure Relief Mattress More Info
450 lb Capacity
Model: M-AURA-APSE-84368

The Amico Apollo MS Hospital Bed offers five adjustable positions in order to provide patients with plenty of comfort while recuperating. Quiet Linak™ DC actuators allow the Patient Bed to be adjusted in a variety of positions. Patients and staff can easily adjust the back elevation, knee elevation, and height of the Bed. Trendelenburg or Reverse-Trendelenburg positions are also available. The Amico B-E-AM1-4000-120 Medical Bed has a 550 lb weight capacity and is ideal for all hospitals, surgery centers, and bariatric facilities.

Apollo Medical Beds have a minimum height 16 inches which allows for safer entry and exit. The low height also helps reduce injuries for patients who may be prone to falling. When elevated into the fowler position, the Medical Bed has an auto-contour feature which creates an ergonomic seated position for the patient while preventing the mattress from moving. The ergonomic design also helps with patients who have back injuries. By pushing the flat button, the Adjustable Medical Bed is automatically brought back to a flat position. A CPR release system will lower the Fowler section in case of emergencies. This is done by pulling one of the pull handles on either side of the headboard. The Linak™ DC actuators which control the adjustments are highly reliable and are protected against the ingress of fluid. A modular battery backup allows patients and staff to continue operating the adjustment controls while the bed is not connected to a power source or has lost power.

Uniquely designed side rails comply with Hospital Bed Safety Workgroup (HBSW) and International Electrotechnical Commission (IEC) regulations for patient safety and preventing entrapment. Controls for adjusting the Medical Bed are easy to use and are located in the inner side rails allowing for easy patient use.

In addition to controlling the knee and head positions, patients also have access to a nurse call button and an under/over bed light. The LED light allows patients to view and operate the controls at night. Staff have access to an identical set of controls which are located on the footboard and both outer side rails. A lock-out function allows staff to restrict the positioning controls in order to prevent any unwanted adjustments.

The Hospital Bed features a folding IV pole along with four IV pole sockets (one at each corner). Custom 6 inch Tente® swivel caster wheels allow staff to maneuver the Beds with ease. A central locking brake mechanism places the brakes in an easily accessible location while the bed is being maneuvered. Integrated roller bumpers located at all four corners protect the bed and any nearby walls from being damaged. The foot board easily lifts to extend out an additional 4 inches for taller patients. Although the fowler and height can be raised, the headboard will stay at an ergonomic height in order to offer easy access for caregivers. Staff can easily remove the head and foot boards in a single step. Apollo MS beds are constructed with a flat, powder-coated metal deck which allows for easier cleaning and better infection control. The flat deck is compatible with most standard mattresses. An integrated mattress retainer helps prevent the mattress from moving and sliding. See related products above for mattresses. Located on the footboard is an integrated pump holder for air mattresses. Customers can choose between two mylar colors, blue or maple, for the side rail and footboard panels. Apollo Beds feature a Hospital Grade Plug for a more secure connection.

Amperage with Auxiliary Out, Domestic 9.8 Amps
Amperage, Domestic 4 Amps
Caster Wheel Diameter 6"
Dimensions, Patient Surface Area 84" x 35" (213 x 84 cm) LxW
Electrical Frequency 50 to 60 Hz
Extendable Bed Length 4"
Height Range 16 to 28" (40 to 71 cm)
IV Pole Sockets 4
Maximum Angle, Trendelenburg/Reverse-Trendelenburg +/- 12°
Overall Dimensions, Side Rails Down 92" x 40" (234 x 102 cm) LxW
Overall Dimensions, Side Rails Up 92" x 42" (234 x 107 cm) LxW
Voltage, Domestic 120V AC
Voltage, International 100V AC, 120V AC, 200V AC, 220V AC
Weight Capacity 550 lbs (250 kg)
3 Year Warranty

The manufacturer warrants that this product is free from defects in material and workmanship. Repair or replacement will be issued for any product which is found defective under the terms of this warranty. QuickMedical will assist with warranty issues within 30 days of product delivery. After that time, the products manufacturer must be contacted directly to address all warranty issues.

30 Day Return Policy

This product has a 30-day money back guarantee. Simply call QuickMedical Customer Service at 425-222-5963 for a return authorization number and instruction on where to ship the return. All returns must be authorized and in original packaging.

Restock Fee

If returned, this product's manufacturer may charge a restocking fee of 30%.

To avoid factory restock fees, please consult with a QuickMedical sales associate to insure the product meets your needs. On site demos or factory approved trial and evaluations can be arranged, and may reduce or eliminate restocking fees.