Olympic Bili-Meters for Phototherapy Lights

Bili-Meter, B-22 for Fluorescent and Halogen Lights
Bili-Meter, F-22 for Fiberoptic Pads
Bili-Meter, B-22 for Fluorescent and Halogen Lights
Olympic Medical 53822 Bili-Meter, B-22 for Fluorescent and Halogen Lights
  • Share
Model: 53822
Model: 53825



  • Large clear display - Easy to read under all lighting conditions
  • Standard units - Microwatts per square centimeter per nanometer
  • Easy to clean - Can be wiped clean with disinfectants
  • Microprocessor - For improved linearity, reliability and memory
  • Memory Feature
  • Action spectrum - Measures action spectrum of bilirubin, 425-475 nm
  • Interchangeable sensors
  • Long battery life - automatic shut-off
  • Auto-ranging - Automatically measures irradiance from 0.1 to 150.0
More Details

The Olympic Bili-Meter has long been recognized as the standard of accuracy for measuring irradiance during neonatal phototherapy - used for almost 20 years in thousands of nurseries worldwide. With the Model 22 Bili-Meter when you release the button, your final reading remains locked on the display for 30 seconds. This gives you time to put the Bili-Meter down and chart your reading without having to memorize the results. Your job is made easier and faster, and the possibility of memory error is eliminated. To take a new (or repeat) reading, simply press and hold the button and the previous memory is erased.

The key to the Olympic Bili-Meter's accuracy is the precision optical system. The sensor has a dome diffuser to minimize angular sensitivity. Behind the diffuser a specially designed dichroic filter transmits only the narrow wavelengths of blue light that principally affect bilirubin. Another filter blocks the infrared, and a sensitive, blue-enhanced diode detects radiation. To this laboratory quality optical system, the Model 22 Bili-Meter has now added microprocessor electronics for improved linearity and reliability and memory.

The Model 22 Bili-Meter is available with either of two sensors. Both sensors measure in standard units of microwatts per square centimeter per nanometer - range 0.1 to 150.0 - and the same spectral region of 425-475 nanometers.

Type B-22 Sensor is used for measuring phototherapy lights including fluorescent, halogen and even sunlight. However, the B-22 Sensor should not be used with fiberoptic phototherapy pads or LED lights.

Type F-22 Sensor is designed specifically to measure irradiance of fiberoptic phototherapy pads. Measures irradiance over large area (45.5 square centimeters) directly at surface of pad.

1 Year Warranty

The manufacturer warrants that this product is free from defects in material and workmanship. Repair or replacement will be issued for any product which is found defective under the terms of this warranty. QuickMedical will assist with warranty issues within 30 days of product delivery. After that time, the product's manufacturer must be contacted directly to address all warranty issues.

Return Policy

This item is not returnable after the package has been opened or if the original seal is broken. An exception may be made if the product is confirmed defective by the manufacturer and the manufacturer agrees to take them back. Products requiring refrigeration may not be returned.


Replacement B-22 Sensor for Bili-Meter
Factory Direct
Replacement F-22 Sensor for Bili-Meter
Factory Direct