UMF Medical 5005 Bariatric Power Exam Table with Low Access
Bariatric Exam Table
With CAL-133 Upholstery
Made in USA
- Weight Capacity of 800 lb (363 kg)
- ADA compliant low access height of 19 in
- All-steel heavy duty construction
- Electro-mechanical actuator system
- Two function hand control
- Fully articulating leg section
- Large, fully extending storage drawer on roller bearing guides
- Concealed paper roll holder, fits 18 - 21 in (45.7 - 53.3 cm) rolls
- Accessory rails at chest
- Ultra comfort seamless top with built-in pillow
- Vacuum formed upholstery
- Available in 8 upholstery colors
- CAL-133 Fire Retardant Upholstery/Fabric combination available on F models
- Proudly made in the USA
The UMF Medical Low Access 5005 Bariatric Power Exam Table powered actuator system lowers the table to an ADA compliant 19 inches (48.3 cm) for patient transfer and then raises to 35 inches (88.9 cm) for the convenience of the care provider during the procedure. The all-steel heavy duty construction safely accommodates patients up to 800 lb (362.87 kg). The Bariatric Procedure Table offers a 30 inch (76.2 cm) wide and 70 inch (177.8 cm) long top with thick, high density padding and a built in pillow for the stability and comfort of the patient. This generous sizing can also be extended to 80 inches (203.2 cm) with use of the articulating leg section.
The Bariatric Power Exam Table also features a fully articulating power assisted back section and is controlled by a two function hand control. The Low Access Table features a large, fully extendable storage drawer on roller bearing guides, a concealed paper roll holder, and accessory rails.
The UMF Medical Power Bariatric Table offers a wide array of accessories - See accessories below. Two options are factory installed only and must be requested at the time the order is placed: Armboard Assembly (specify patient right or left) and Accessory Rail Pair (specify head or seat section). Additional accessories include: Two Function Foot Control (substitution for hand control); Simultaneous Two Function Foot and Hand Control; Paper Cutter Band; Paper Roll Holder; Rod and Bracket for 21 inch (53.3cm) paper rolls; Restraint Straps (each strap requires two 039 accessory rails).
The 5005 and 5005F come standard with an river rock powder coated steel frame and are available in your choice of 8 upholstery colors. Both models of the table are designed with the UMF Medical vacuum-formed Ultra Comfort Seamless Top for easy cleaning and prevention of cross contamination. Additionally, the 5005F Power Exam Table features a CAL-133 Fire Retardant Foam/Upholstery combination. The Low Access Bariatric Table helps to prevent back injury to medical staff and offers easy access for wheelchair transfers, geriatric and special needs patients. The UMF Medical 5005 Exam Table is an ideal and durable choice for any clinical setting. UMF Medical products are proudly made in the USA.
|Height Range||19 to 35" (48.3 to 88.9 cm)|
|Leg Extension Length||10" (25.4 cm)|
|Length||70" (177.8 cm)|
|Paper Roll Holder Width||18 to 21" (45.7 to 53.3 cm)|
|Power||120V AC, 60 Hz|
|Storage Drawer Dimensions||19" x 16" x 4.5" (48.3 x 40.6 x 11.4 cm) LxWxD|
|Weight Capacity||800 lbs (363 kg)|
|Width||30" (76.2 cm)|
3 Year Warranty
The manufacturer warrants that this product is free from defects in material and workmanship. Repair or replacement will be issued for any product which is found defective under the terms of this warranty. QuickMedical will assist with warranty issues within 30 days of product delivery. After that time, the products manufacturer must be contacted directly to address all warranty issues.
UMF Medical Return Policy
Merchandise will not be accepted for return unless specifically authorized by UMF Medical. No returns will be authorized or items accepted for return after 30 days of the invoice date. Products accepted for credit will be subjected to a 25% re-stocking charge plus any material or labor necessary to restore products to a saleable condition. Items of special design, accessories and parts (including replacement parts) are non-refundable. All goods damaged are subject to repair charges being deducted from credit.
Returned items must be in the original cartons. If you do not have the original packaging, this can be purchased from UMF Medical.
The original purchaser must provide the following information to UMF Medical Customer Service to obtain a Returned Goods Authorization document:
1.Reason for return 2.Original purchase order number and/or invoice number from UMF Medical 3.Model number and quantity returned
A Returned Goods Authorization (RGA) number must be obtained from UMF Medical Customer Service before any merchandise will be accepted for return. Items must be returned on a prepaid basis only within 15 days of the date shown on the Returned Goods Authorization document.
Note: UMF Medical casework, custom products, discontinued items or replacement parts are non-returnable. Once any UMF Medical product has been put into service or used in a medical practice, it cannot be returned.