UMF Medical 8677 Power ENT Chair
With CAL-133 Upholstery
- Freight Shipping Information
- Made In United States
- Weight capacity of 375 lb (170.1 kg)
- Power hi-lo and backrest
- Two function hand controlled operation
- Self positioning armrests and leg section
- Low access height of 24 in
- Reclines to 30 degrees from horizontal position
- Electro-mechanical actuator system
- Ultra Comfort Seamless vacuum formed upholstered top
- Available in 8 upholstery colors
- CAL-133 upholstery available on F models
- Proudly made in the USA
UMF Medical 8677 Power ENT Chair has a weight capacity of 375 lbs (170.1 kg). The ENT Chair auto-position armrest and leg section automatically adjust to match the backrest angle for ease of use. The Exam Chair is power adjusted for height and backrest with a low access height of 24 inches and reclines to 30 degrees from horizontal controlled by a two function hand control. Each arm on the Treatment Chair is hinged for easy patient transfers and access. The 8677 is available in 8 upholstery colors with an Ultra Comfort Seamless vacuum formed top to prevent cross contamination. The 8677F features California fire code (CAL-133) upholstery. UMF Medical products are proudly made in the USA.
|Arm Length||23" (58.4 cm)|
|Dimensions||67 x 31.5" (170.2 x 80 cm) LxW, fully extended|
|Power||120V, 60 Hz|
|Seat Height Range||24 to 36" (61 to 91.4 cm)|
|Seat Width||18" (45.7 cm)|
|Weight Capacity||375 lbs (170.1 kg)|
3 Year Warranty
The manufacturer warrants that this product is free from defects in material and workmanship. Repair or replacement will be issued for any product which is found defective under the terms of this warranty. QuickMedical will assist with warranty issues within 30 days of product delivery. After that time, the products manufacturer must be contacted directly to address all warranty issues.
UMF Medical Return Policy
Merchandise will not be accepted for return unless specifically authorized by UMF Medical. No returns will be authorized or items accepted for return after 30 days of the invoice date. Products accepted for credit will be subjected to a 25% re-stocking charge plus any material or labor necessary to restore products to a saleable condition. Items of special design, accessories and parts (including replacement parts) are non-refundable. All goods damaged are subject to repair charges being deducted from credit.
Returned items must be in the original cartons. If you do not have the original packaging, this can be purchased from UMF Medical.
The original purchaser must provide the following information to UMF Medical Customer Service to obtain a Returned Goods Authorization document:
1.Reason for return 2.Original purchase order number and/or invoice number from UMF Medical 3.Model number and quantity returned
A Returned Goods Authorization (RGA) number must be obtained from UMF Medical Customer Service before any merchandise will be accepted for return. Items must be returned on a prepaid basis only within 15 days of the date shown on the Returned Goods Authorization document.
Note: UMF Medical casework, custom products, discontinued items or replacement parts are non-returnable. Once any UMF Medical product has been put into service or used in a medical practice, it cannot be returned.